How to to setup a proxy for Iran citizens

[via Austin Heap]

If you’re using CentOS/Redhat, it’s pretty straight forward to setup a proxy and help give access to those in Iran who are being censored.

Login as root and run the following

yum install squid
nano -w /etc/squid/squid.conf

Inside the code editor search (Control-W) for the line “http_access deny all” and change it to “http_access allow all”. This will make your proxy open and accessible to the world. If you would like to limit your proxy to Iranian IP blocks, you want to change “http_access deny all” to read “http_access allow TRUSTED” add a line (BEFORE the http_access line to setup an access control list [ACL]). This ACL line that defines TRUSTED should read:

acl TRUSTED src 62.60.128.0/17 62.193.0.0/19 62.220.96.0/19 77.36.128.0/17 77.77.64.0/18 77.104.64.0/18 77.237.64.0/19 77.237.160.0/19 77.245.224.0/20 78.38.0.0/15 78.109.192.0/20 78.110.112.0/20 78.111.0.0/20 78.154.32.0/19 78.157.32.0/19 78.158.160.0/19 79.127.0.0/17 79.132.192.0/19 79.170.144.0/21 79.175.128.0/18 80.66.176.0/20 80.69.240.0/20 80.71.112.0/20 80.75.0.0/20 80.191.0.0/16 80.242.0.0/20 80.253.128.0/20 80.253.144.0/20 81.12.0.0/17 81.28.32.0/20 81.28.48.0/20 81.31.160.0/20 81.31.176.0/20 81.90.144.0/20 81.91.128.0/20 81.91.144.0/20 82.99.192.0/18 82.115.0.0/19 83.147.192.0/18 84.47.192.0/18 84.241.0.0/18 85.9.64.0/18 85.15.0.0/18 85.133.128.0/17 85.185.0.0/16 85.198.0.0/18 86.109.32.0/19 87.107.0.0/16 87.247.160.0/19 87.248.128.0/19 89.144.128.0/18 89.165.0.0/17 89.221.80.0/20 89.235.64.0/18 91.98.0.0/15 91.184.64.0/19 91.186.192.0/19 91.206.122.0/23 91.208.165.0/24 91.209.242.0/24 91.212.16.0/24 91.212.19.0/24 91.212.252.0/24 92.42.48.0/21 92.50.0.0/18 92.61.176.0/20 92.62.176.0/20 92.242.192.0/19 93.110.0.0/16 93.190.24.0/21 94.74.128.0/18 94.101.128.0/20 94.101.176.0/20 94.101.240.0/20 94.139.160.0/19 94.182.0.0/15 94.184.0.0/17 94.232.168.0/21 94.241.128.0/18 95.38.0.0/16 95.80.128.0/18 95.81.64.0/18 95.82.0.0/18 95.82.64.0/18 95.130.56.0/21 95.130.240.0/21 188.34.0.0/16 188.93.64.0/21 188.121.96.0/19 188.121.128.0/19 188.136.128.0/17 188.158.0.0/15 193.189.122.0/23 194.225.0.0/16 195.146.32.0/19 212.16.64.0/19 212.33.192.0/19 212.50.224.0/19 212.80.0.0/19 212.95.128.0/19 212.120.192.0/19 213.176.0.0/19 213.176.32.0/19 213.176.64.0/18 213.195.0.0/18 213.207.192.0/18 213.217.32.0/19 213.233.160.0/19 217.11.16.0/20 217.24.144.0/20 217.25.48.0/20 217.64.144.0/20 217.66.192.0/20 217.66.208.0/20 217.146.208.0/20 217.172.96.0/19 217.174.16.0/20 217.218.0.0/15

Turn off logging by adding these two lines:

access_log none
cache_store_log none

Save the config file and as root issue the following command to start the Squid proxy server:

service squid start

Please don’t run this on a machine that you’re worried about or is used for production sites; and take basic security precautions, ie: moving SSH off the default port, using iptables, etc.

Once your server is up and running please tweet @austinheap and let me know!